Click the images ↓

Click the images ↑

For non-USA shipping click here.

If you want faster USA-only USPS Priority Mail shipping + the security of a Delivery Confirm tracking number, add an extra $4 shipping charge to your order by clicking the cart button below. Total shipping & handling charge will be $3 + $4 = $7.00.

Extra $4 shipping for Priority Mail Delivery Confirm. → → → →

If you live in California and need your screws in a hurry, I highly recommend you click the "Add to Cart" link above and pay the $4 extra shipping for Priority Mail Delivery Confirm. I've had more packages lost, damaged, and outright destroyed when shipped to California than to every place else in the world combined.

If you prefer not to use PayPal, then write your order from the list below, add $3 for shipping, and send cash, check, MO, or USA snailmail stamps to:

Junior Doughty
190 Major Doughty Road
Tullos, Louisiana 71479

Note: on PayPal, you'll be paying Deltablues.net which is my main site.

Note: If your browser won't open the PayPal page, hold down your "Ctrl" key while clicking.

Note: Make sure your email and snailmail addresses on PayPal are correct!

The screw length value, i.e., "3/16", is the length of the threads.

The screw head diameters by micrometer measurement are:

• Fillister #6 = .200"; #8 = .235"
  
• Weaver oval #6 = .205" - .208"; #8 = .235"

Hex wrenches and bits on sale below!

Screw Checker/Shortening Jig @ $10.00 each

This little hardened metal bar is indispensible for checking screw threads and for shortening screws. It's .130" thick, .378" wide, and 3.745" long. It has three tapped holes in it—6-40, 6-48 and 8-40. To shorten a screw, install a screw in the proper hole and hacksaw off or file down the protruding end of the screw. When you remove the screw, the hardened hole threads chase the altered screw threads. This little jig is a must-have for a gun tinkerer.

	English Screw Thread Gauge @ $14.95 each 100% steel with 28 blades from 4 to 80 turns per inch: 4, 4½ 5, 6, 7, 8, 9, 10, 11, 11½, 12, 13, 14, 16, 18, 20, 24, 27, 28, 32, 36, 40, 44, 48, 56, 64, 72, 80. You can buy a cheaper thread guage, but it might not have a blade to fit your screw.
	Metric Screw Thread Gauge @ $14.95 each 100% steel with 24 blades. Every shop will eventually need one of these.

INDEX Socket head Fillister & Weaver The head takes a 3/32" hex wrench. Fillister head slotted Common scope ring and mount screws. Other Fillister head slotted Not so common Fillister head screws. Weaver oval head slotted Slotted plug screws Hex head plug & set screws & hex wrenches & bits Torx screws & bits Sling swivel studs Small zip bags

Socket head Fillister & Weaver

Socket head Fillister

3/32" hex wrench @ $1.50 each
3/32" hex bit @ $2.25 each
6 - 40 x 3/8" @ .65¢ each
6 - 40 x 1/2" @ .65¢ each
6 - 48 x 1/4" @ .65¢ each
6 - 48 x 3/8" @ .65¢ each
6 - 48 x 9/16" @ .65¢ each
8 - 40 x 1/4" @ .65¢ each
8 - 40 x 3/8" @ .65¢ each
8 - 40 x 1/2" @ .65¢ each

Socket head Weaver

6 - 40 x 1/4" @ .65¢ each
6 - 40 x 3/8" @ .65¢ each
6 - 48 x 1/4" @ .65¢ each
6 - 48 x 3/8" @ .65¢ each
8 - 40 x 1/4" @ .65¢ each
8 - 40 x 1/2" @ .65¢ each

6 - 48 x 3/16" @ .65¢ each
6 - 48 x 1/4" @ .65¢ each
6 - 48 x 5/16" @ .65¢ each
6 - 48 x 3/8" @ .65¢ each
6 - 48 x 7/16" @ .65¢ each
6 - 48 x 1/2" @ .65¢ each
6 - 48 x 3/4" @ .65¢ each
8 - 40 x 1/4" @ .65¢ each
8 - 40 x 3/8" @ .65¢ each
8 - 40 x 1/2" @ .65¢ each
8 - 40 x 1" @ .65¢ each
8 - 40 x 1" @ 50 for $22.00
6 - 40 x 1/2" stainless steel @ $1.25 each
6 - 48 x 1/2" stainless steel @ $1.25 each
8 - 40 x 1/2" stainless steel @ $1.25 each

0 - 80 x 1/2" @ .65¢ each
1 - 72 x 1/2" @ .65¢ each
2 - 56 x 7/8" @ .65¢ each
2 - 64 x 7/8" @ .65¢ each
3 - 48 x 1" @ .65¢ each
3 - 56 x 7/8" @ .65¢ each These fit some antique clocks. With trimming, replaces Lyman 66 sight elevation scale screw, slide lock set screw, and elevation stop screw. Can much increase elevation "up" adjustment.
4 - 40 x 1" @ .65¢ each
4 - 48 x 1" @ .65¢ each
5 - 40 x 1" @ .65¢ each
5 - 44 x 1" @ .65¢ each
6 - 32 x 1" @ .65¢ each   With shortening, these replace Leupold PRW "keeper" screws.
6 - 40 x 1" @ .65¢ each
8 - 32 x 1" @ .65¢ each These fit Lyman molds, some perfectly, some with shortening.
8 - 32 x 1" stainless steel @ .65¢ each
8 - 36 x 1" @ .65¢ each
8 - 40 x 1" @ .65¢ each
8 - 40 x 1" @ 50 for $22.00
10 - 24 x 1" @ .65¢ each
10 - 32 x 1" @ .65¢ each
10 - 32 x 1 1/2" stainless steel @ .60¢ each
12 - 24 x 1" @ .65¢ each
12 - 28 x 1" @ .65¢ each

6 - 48 x 5/32" @ .65¢ each
6 - 48 x 3/16" @ .65¢ each
6 - 48 x 1/4" @ .75¢ each
6 - 48 x 1/2" @ .65¢ each
8 - 40 x 1/4" @ .65¢ each
8 - 40 x 1/2" @ .65¢ each
6 - 40 x 1/2" stainless steel @ $1.25 each
6 - 48 x 1/2" stainless steel @ $1.25 each
8 - 40 x 1/2" stainless steel @ $1.25 each

6 - 40 blued stainless @ $3.00 each
6 - 48 blued @ .70¢ each
6 - 48 blued @ $6.95 per dozen
6 - 48 stainless @ $1.50 each
6 - 48 stainless @ $14.95 per dozen
8 - 40 blued @ .75¢ each
8 - 40 blued @ $6.95 per dozen
8 - 40 stainless @ $2.00 each
10 - 32 blued @ .70¢ each
6 - 48 blued positive stop @ $2.25 each
6 - 48 stainless positive stop @ $2.25 each
8 - 40 blued positive stop @ $2.25 each
8 - 40 stainless positive stop @ $2.25 each

Hex plug & set screws & hex wrenches & bits

Photos not to scale. Hex bits are 1" OAL with 1/4" shanks. Items below in green text are on sale.

.050" hex wrench @ $1.50 each Fits 3-48, 3-56 and 4-40 hex plug screws
1/16" hex wrench @ $1.50 each Fits 5-40, 6-32 and 6-48 hex plug screws
1/16" hex bit @ $2.25 each
5/64" hex wrench @ $1.50 each Fits 8-32, 8-36 and 8-40 hex plug screws
5/64" hex bit @ $2.25 each
7/64" hex wrench @ .25¢ each while they last. Ordered by mistake.
3/32" hex wrench @ $1.50 each Fits 10-32 hex plug screws and socket head screws. Also fits the set screw in reloading die lock rings.
3/32" hex wrench 5 for $7.00 Keep the proper hex wrench in every die box!
3/32" hex bit @ $2.25 each
1/8" hex wrench @ $1.50 each Fits 1/4" hex plug screws
1/8" hex bit @ $2.25 each
6 hex wrench set @ $5.00 1 each of all the above hex wrenches
4 hex bit set @ $8.00 1 each of 1/16" 5/64" 3/32" and 1/8" bits
The hex head screws below are the highest quality available.
3-48 x 1/8" @ .70¢ each
3-56 x 1/8" @ .90¢ each
4-40 x 1/8" @ .75¢ each
5-40 x 1/4" @ .65¢ each Fits Uncle Mike's hammer spur, small screw
6-32 x 3/16" @ .75¢ each
6 - 48 x 1/8" @ $1.00 each For plugging sight holes in most guns.
8-32 x 1/4" @ .75¢ each Fits Uncle Mikes hammer spur, large screw
8-36 x 1/4" @ .40¢ each
8-36 x 5/16" @ .40¢ each
8 - 40 x .130" @ $1.65 each For plugging sight holes in some guns.
10-32 x 3/16" @ .65¢ each
10-32 x 1/4" @ .60¢ each
10-32 x 5/16" @ .60¢ each
10-32 x 3/8" @ .65¢ each
10-32 x 1/2" stainless steel @ .60¢ each
10-32 x 5/8" @ .75¢ each
All these 1/4" set screws take a 1/8" hex wrench.
1/4-20 x 1/4" @ .55¢ each
1/4-20 x 1/4" stainless steel @ .50¢ each
1/4-20 x 3/8" brass @ $1.80 each
1/4-20 x 3/8" @ .55¢ each
1/4-20 x 1/2" @ .65¢ each
1/4-20 x 1/2" stainless steel @ .80¢ each
1/4-28 x 3/8" @ .35¢ each
1/4-28 x 1/2" @ .65¢ each Fits many non-Mauser action screw holes. Protect the threads in your spare actions. Measure your thread size—don't ask me! Click here for a partial list.

Torx Fillister & Weaver Head
Click here and jump to Weaver torx
Click here and jump to genuine Leupold torx

T10 Torx Screwdriver Bit @ $1.00 each
T15 Torx Screwdriver Bit @ $1.00 each
T-10 & T15 Torx Bits @ $1.50 per set
6-40 X 3/8" T-10 TORX FILLISTER @ .65¢ each
6-40 X 1/2" T-10 TORX FILLISTER @ .65¢ each
6-48 X 1/4" T-10 TORX FILLISTER @ .65¢ each
6-48 X 3/8" T-10 TORX FILLISTER @ .65¢ each
6-48 X 9/16" T-10 TORX FILLISTER @ .65¢ each
8 - 40 x 1/4" T-10 TORX FILLISTER @ .70¢ each
8 - 40 x 3/8" T-10 TORX FILLISTER @ .70¢ each
8 - 40 x 1/2" T-10 TORX FILLISTER @ .70¢ each
8 - 40 x 1/4" T-15 TORX FILLISTER @ .70¢ each
8 - 40 x 3/8" T-15 TORX FILLISTER @ .70¢ each
8 - 40 x 1/2" T-15 TORX FILLISTER @ .70¢ each
6 - 40 x 1/4" T-10 TORX WEAVER @ .65¢ each
6 - 40 x 3/8" T-10 TORX WEAVER @ .65¢ each
6 - 48 x 1/4" T-10 TORX WEAVER @ .65¢ each
6 - 48 x 3/8" T-10 TORX WEAVER @ .65¢ each
8 - 40 x 1/4" T-10 TORX WEAVER @ .70¢ each
8 - 40 x 1/2" T-10 TORX WEAVER @ .70¢ each
8 - 40 x 1/4" T-15 TORX WEAVER @ .70¢ each
8 - 40 x 3/8" T-15 TORX WEAVER @ .70¢ each
8 - 40 x 1/2" T-15 TORX WEAVER @ .70¢ each

6-48 X .150" Leupold Blued @ $1.35 each
6-48 X .200" Leupold Blued @ $1.35 each
6-48 X .260" Leupold Blued @ $1.35 each
6-48 X .280" Leupold Blued @ $1.35 each
6-48 X .350" Leupold Blued @ $1.35 each
6-48 X .385" Leupold Blued @ $1.85 each

...................................................................................

6-40 X .485" Leupold SS @ $2.70 each
6-48 X .150" Leupold SS @ $1.85 each
6-48 X .210" Leupold SS @ $1.85 each Only 21 in stock
6-48 X .260" Leupold SS @ $1.85 each
6-48 X .280" Leupold SS @ $1.85 each
6-48 X .350" Leupold SS @ $1.85 each

.......................................................................................

8-36 X .375" Leupold Blued @ $2.00 each Head D = .265"     T = .115"
8-40 X .205" Leupold Blued @ $2.00 each
8-40 X .280" Leupold Blued @ $2.00 each
8-40 X .360" Leupold Blued @ $2.00 each

....................................................................

8-36 X .375" Leupold SS @ $2.50 each
8-40 X .280" Leupold SS @ $2.50 each

Uncle Mike's swivel studs These are sling swivel studs but they have other uses. I used the wood screw to put a saddle ring on the stock of a muzzleloader. I used the 7/8" machine screw to put a dandy elevation-adjustable rear peep sight on a Mosin-Nagant. I used the 1/4" machine screw to put a saddle ring on the same Mosin-Nagant.

10-32 x 1/4" machine screw swivel stud @ $2.25 each
10-32 x 3/8" machine screw swivel stud @ $2.25 each
10-32 x 1/2" machine screw swivel stud @ $2.25 each (only 1 in stock)
10-32 x 5/8" machine screw swivel stud @ $2.25 each
10-32 x 3/4" machine screw swivel stud @ $2.25 each
10-32 x 7/8" machine screw swivel stud @ $2.25 each
Machine screw swivel stud dome nut @ $2.10 each
3/4" wood screw swivel stud @ $2.25 each
1/2" wood screw swivel stud @ $2.25 each
White spacer for swivel studs @ .50¢ each
5 white spacers for swivel studs $2.00
Black spacer for swivel studs @ .50¢ each
5 black spacers for swivel studs $2.00

Small 2 Mil Zip Poly Bags These are the tough little zip bags in which I ship larger quantities of some small items. They're twice as thick as zip sandwich bags. You can write on the white block bags with a marker, ballpoint pen or pencil. You can identify the contents of the bag without using a stick-on label. Compare at 11¢ per bag!

3" x 5" 2 Mil White Block Zip Poly Bags @ 7¢ each

3" x 5" 2 Mil White Block Zip Poly Bags @ $6 per 100
2" x 3" 2 Mil Plain Zip Poly Bags @ 5¢ each
2" x 3" 2 Mil Plain Zip Poly Bags @ $4.00 per 100

Coin envelopes 2 1/4" x 3 1/2" & 2 1/2" x 4 1/4" These are the little envelopes in which I ship rivets and other small items. They're gummed and made from 24# manila. They're great for organizing small stuff in a tool box or parts bin. At only 6¢ or 8¢ each, add a few to your order.

Coin envelopes 2 1/4" x 3 1/2" @ 6¢ each
Coin envelopes 2 1/2" x 4 1/4" @ 8¢ each

Bright tags 3 1/4" x 1 5/8" @ 10¢ each These fluorescent tags glow yellow under house lights and green under sunlight, as you see here. Under any light, they're highly visible. Use them to price-tag stuff at gun shows, garage sales, etc., and you can better see your stuff if it walks away, as stuff tends to do. . . . No strings, so make your own with string, rubber bands, twist-ties, etc. Made from heavy, plastic-like paper. At only 10¢ each, add a couple to your screw order.

Bright tags 3 1/4" x 1 5/8" @ 10¢ each